蒙陰長毛兔廠家給您介紹一下長毛兔養殖籠具的結構要求：

　　Darkened hares manufacturers to introduce you to hares aquaculture basket structure:

　　(1)籠門

　　the door

　　應安裝于養殖籠具的正前方，要求啟閉方便，能防獸害、防啃咬?？捎弥衿⒋蜓坭F皮、鍍鋅冷拔鋼絲等制成。一般以右側安轉軸，向右側開門為宜.為提高工效，草架、食槽、飲水器等均可掛在籠門上，以增加籠內實用面積，減少開門次數。

　　Should be installed in breeding directly in front of the basket, easy opening and closing, can prevent the beast, bite. Can use bamboo, iron, galvanized punch a cold drawn steel wire, etc. Generally in the right side of the shaft, it is advisable to open the door on the right side. In order to improve the work efficiency, grass, feed trough, water fountain, etc all can be hung on the door, to increase the area of cage, reduce the number of open the door.

　　(2)籠壁

　　the cage wall

　　一般養殖籠具的籠壁是用水泥板或磚、石等砌成，也可用竹片或金屬網釘成，要求籠壁保持平滑，堅固防啃，以免損傷免體和鉤脫兔毛。如用磚砌或水泥預制件，需預留承糞板和籠底板的擱肩(3~5厘米)。.如用竹、木柵條或金屬網條，則以條寬1.5~3厘米，間距1.5~2厘米為宜。

　　General breeding of basket cage wall is built with concrete or brick, stone, etc, can also be used bamboo or metal net form, the cage wall is asked to keep smooth, strong anti chew, lest damage from body and hook to take off the rabbit hair. Such as brick or cement bricks, need to reserve plate bearing dung and cage bottom shelf shoulder (3 ~ 5 cm). . The article such as bamboo, paling or metal mesh, with a 1.5 ~ 3 cm wide, spacing of 1.5 ~ 2 centimeters advisable.

　　(3)承糞板

　　bearing dung plate

　　養殖籠具的承糞板宜用水泥預制件。厚度為2~2.5厘米，要求防漏防腐;便于清理消毒.在多層兔籠中，上層承糞板即為下層的籠頂。為避免上層兔籠的糞尿、沖刷污水濺污下層兔籠內，承糞板應向籠體前伸3~5厘米，后延5~10厘米，前后傾斜角度為10°~15°以便糞尿經板面自動落入糞溝，并利于清掃。

　　Aquaculture cages of dung plate appropriate USES cement bricks. Thickness is 2-2.5 cm, asking the leakproof anti-corrosion; Facilitate cleaning disinfection. In multilayer rabbit cage, upper bearing dung plate is the lower of the cage. In order to avoid the upper rabbit cage, manure, sewage flushing spatter rabbit cage, lower bearing dung plate to cage devices for 3 ~ 5 cm, by 5 ~ 10 cm, front and back Angle of 10 ° ~ 15 ° to manure by the panel automatically fall into dung ditch, and facilitate cleaning.

　　(4)籠底板

　　the cage bottom

　　養殖籠具的籠底板一般用竹片或鍍鋅冷拔鋼絲制成，要求平面不滑，堅固而有一定彈性，宜設計成活動式，以利清洗、消毒或維修.如用竹片釘成，要求條寬2.5~3厘米，厚0.8~1厘米，間距1~1.2厘米.竹片釘制方向應與籠門垂直，以防兔腳形成向兩側的劃水姿勢。

　　Breeding of basket cage floor generally made from bamboo or galvanized cold drawn steel wire, flat no slip, strong and have certain elasticity, and appropriate designed activity type, and to facilitate cleaning, disinfection or repair. If use bamboo nails, article for 2.5 ~ 3 cm wide, 0.8 ~ 1 cm thick, spacing of 1-1.2 cm. Bamboo nails direction should be perpendicular to the cage door, in case of a rabbit's foot form to pull on either side of the position.